#!/usr/bin/perl # # Copyright (C) 1999,2000 Yokogawa Electric Corporation and # YDC Corporation. # All rights reserved. # # Redistribution and use of this software in source and binary # forms, with or without modification, are permitted provided that # the following conditions and disclaimer are agreed and accepted # by the user: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with # the distribution. # # 3. Neither the names of the copyrighters, the name of the project # which is related to this software (hereinafter referred to as # "project") nor the names of the contributors may be used to # endorse or promote products derived from this software without # specific prior written permission. # # 4. No merchantable use may be permitted without prior written # notification to the copyrighters. # # 5. The copyrighters, the project and the contributors may prohibit # the use of this software at any time. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND # CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING # BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE, ARE DISCLAIMED. IN NO EVENT SHALL THE # COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, # INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR # SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING # IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # $Id: RTU_SetAddress.seq,v 1.1.1.1 2000/10/31 22:39:39 sekiya Exp $ # ###################################################################### BEGIN { unshift(@INC, '../ipsec/'); $V6evalTool::TestVersion = '$Name: $ '; } use V6evalTool; use IPSEC; %pktdesc = ( echo_request_from_router => 'Send Echo Request from Router', echo_reply_to_router => 'Recv Echo Reply to Router', echo_request_from_host1 => 'Send Echo Request from Host1', echo_reply_to_host1 => 'Recv Echo Reply to Host1', ns_to_router => 'Recv Neighbor Solicitation', na_from_router => 'Send Neighbor Advertisement', ); ipsecCheckNUT(router); $if_nut_net0 = $V6evalTool::NutDef{Link0_device}; $if_nut_net1 = $V6evalTool::NutDef{Link1_device}; ipsecReboot(); # # set global address # if ($IPSEC::IPsecAddr{IPSEC_IPVERSION} == 4) { # for IPv4 $ret = vRemote( "manualaddrconf.rmt", "if=$if_nut_net0", "addrfamily=inet", "type=delete", ); if ($ret) { vLogHTML('NG'); exit $V6evalTool::exitFatal; } $ret = vRemote( "manualaddrconf.rmt", "if=$if_nut_net1", "addrfamily=inet", "type=delete", ); if ($ret) { vLogHTML('NG'); exit $V6evalTool::exitFatal; } $ret = vRemote( "manualaddrconf.rmt", "if=$if_nut_net0", "addrfamily=inet", "addr=$IPSEC::IPsecAddr{IPSEC_NUT_NET0_ADDR}", "netmask=$IPSEC::IPsecAddr{IPSEC_NET0_NETMASK}", "type=add", ); if ($ret) { vLogHTML('NG'); exit $V6evalTool::exitFatal; } $ret = vRemote( "manualaddrconf.rmt", "if=$if_nut_net1", "addrfamily=inet", "addr=$IPSEC::IPsecAddr{IPSEC_NUT_NET1_ADDR}", "netmask=$IPSEC::IPsecAddr{IPSEC_NET1_NETMASK}", "type=add", ); if ($ret) { vLogHTML('NG'); exit $V6evalTool::exitFatal; } } else { # for IPv6 $ret = vRemote( 'manualaddrconf.rmt', "if=$if_nut_net0", "addr=$IPSEC::IPsecAddr{IPSEC_NUT_NET0_ADDR}", "len=$IPSEC::IPsecAddr{IPSEC_NET0_PREFIX_LEN}", 'type=unicast' ); if ($ret) { vLogHTML('NG'); exit $V6evalTool::exitFatal; } $ret = vRemote( 'manualaddrconf.rmt', "if=$if_nut_net1", "addr=$IPSEC::IPsecAddr{IPSEC_NUT_NET1_ADDR}", "len=$IPSEC::IPsecAddr{IPSEC_NET1_PREFIX_LEN}", 'type=unicast' ); if ($ret) { vLogHTML('NG'); exit $V6evalTool::exitFatal; } } vSleep(10); #----- start capturing $IF0 = Link0; $IF1 = Link1; vCapture($IF0); vCapture($IF1); #====================================================================== # ping TN(Router) <-> NUT vLogHTML("Ping TN(Router-Net0) <-> NUT(Net0)
"); vSend($IF0, echo_request_from_router); %ret = vRecv($IF0, 5, 0, 0, ns_to_router, echo_reply_to_router); if ($ret{status} != 0) { vLogHTML('NG'); exit $V6evalTool::exitFail; } if ($ret{recvFrame} eq 'ns_to_router') { vSend($IF0, na_from_router); %ret = vRecv($IF0, 5, 0, 0, echo_reply_to_router); if ($ret{status} != 0) { vLogHTML('NG'); exit $V6evalTool::exitFail; } } if ($ret{recvFrame} ne 'echo_reply_to_router') { vLogHTML('NG'); exit $V6evalTool::exitFail; } if ($IPSEC::IPsecAddr{IPSEC_IPVERSION} == 4) { &setroute4(); } else { &setroute(); } vSleep(10); #====================================================================== # ping TN(SG1.Net2) <-> NUT vLogHTML("Ping TN(SG1-Net2) <-> NUT(Net0)
"); vSend($IF0, echo_request_from_sg1_net2); %ret = vRecv($IF0, 5, 0, 0, ns_to_router, echo_reply_to_sg1_net2); if ($ret{status} != 0) { vLogHTML('NG'); exit $V6evalTool::exitFail; } if ($ret{recvFrame} eq 'ns_to_router') { vSend($IF0, na_from_router); %ret = vRecv($IF0, 5, 0, 0, echo_reply_to_sg1_net2); if ($ret{status} != 0) { vLogHTML('NG'); exit $V6evalTool::exitFail; } } if ($ret{recvFrame} ne 'echo_reply_to_sg1_net2') { vLogHTML('NG'); exit $V6evalTool::exitFail; } #====================================================================== # ping TN(Host1.Net1) <-> NUT vLogHTML("Ping TN(Host1-Net1) <-> NUT(Net1)
"); vSend($IF1, echo_request_from_host1_net1); %ret = vRecv($IF1, 5, 0, 0, ns_to_host1_net1, echo_reply_to_host1_net1); if ($ret{status} != 0) { vLogHTML('NG'); exit $V6evalTool::exitFail; } if ($ret{recvFrame} eq 'ns_to_host1_net1') { vSend($IF1, na_from_host1_net1); %ret = vRecv($IF1, 5, 0, 0, echo_reply_to_host1_net1); if ($ret{status} != 0) { vLogHTML('NG'); exit $V6evalTool::exitFail; } } if ($ret{recvFrame} ne 'echo_reply_to_host1_net1') { vLogHTML('NG'); exit $V6evalTool::exitFail; } #====================================================================== # ping TN(Host1.Net4) <-> TN(Host1.Net1) vLogHTML("Ping TN(Host1-Net4) <-> TN(Host1-Net1)
"); # echo request vSend($IF0, echo_request_from_host1_net4_to_host1_net1_on_net0); %ret = vRecv($IF1, 5, 0, 0, ns_to_host1_net1, echo_request_from_host1_net4_to_host1_net1_on_net1); if ($ret{status} != 0) { vLogHTML('NG'); exit $V6evalTool::exitFail; } if ($ret{recvFrame} eq 'ns_to_host1_net1') { vSend($IF1, na_from_host1_net1); %ret = vRecv($IF1, 5, 0, 0, echo_request_from_host1_net4_to_host1_net1_on_net1); if ($ret{status} != 0) { vLogHTML('NG'); exit $V6evalTool::exitFail; } } if ($ret{recvFrame} ne 'echo_request_from_host1_net4_to_host1_net1_on_net1') { vLogHTML('NG'); exit $V6evalTool::exitFail; } # echo reply vSend($IF1, echo_reply_from_host1_net1_to_host1_net4_on_net1); %ret = vRecv($IF0, 5, 0, 0, ns_to_router, echo_reply_from_host1_net1_to_host1_net4_on_net0); if ($ret{status} != 0) { vLogHTML('NG'); exit $V6evalTool::exitFail; } if ($ret{recvFrame} eq 'ns_to_router') { vSend($IF0, na_from_router); %ret = vRecv($IF0, 5, 0, 0, echo_reply_from_host1_net1_to_host1_net4_on_net0); if ($ret{status} != 0) { vLogHTML('NG'); exit $V6evalTool::exitFail; } } if ($ret{recvFrame} ne 'echo_reply_from_host1_net1_to_host1_net4_on_net0') { vLogHTML('NG'); exit $V6evalTool::exitFail; } vLogHTML('OK'); exit $V6evalTool::exitPass; # # set route # sub setroute() { $ret = vRemote( 'route.rmt', 'cmd=add', "if=$if_nut_net0", "prefix=$IPSEC::IPsecAddr{IPSEC_NET2_PREFIX}::", "prefixlen=$IPSEC::IPsecAddr{IPSEC_NET2_PREFIX_LEN}", "gateway=$IPSEC::IPsecAddr{IPSEC_ROUTER_NET0_ADDR}", ); if ($ret) { vLogHTML('NG'); exit $V6evalTool::exitFatal; } $ret = vRemote( 'route.rmt', 'cmd=add', "if=$if_nut_net0", "prefix=$IPSEC::IPsecAddr{IPSEC_NET4_PREFIX}::", "prefixlen=$IPSEC::IPsecAddr{IPSEC_NET4_PREFIX_LEN}", "gateway=$IPSEC::IPsecAddr{IPSEC_ROUTER_NET0_ADDR}", ); if ($ret) { vLogHTML('NG'); exit $V6evalTool::exitFatal; } $ret = vRemote( 'route.rmt', 'cmd=add', "if=$if_nut_net0", "prefix=$IPSEC::IPsecAddr{IPSEC_NET6_PREFIX}::", "prefixlen=$IPSEC::IPsecAddr{IPSEC_NET6_PREFIX_LEN}", "gateway=$IPSEC::IPsecAddr{IPSEC_ROUTER_NET0_ADDR}", ); if ($ret) { vLogHTML('NG'); exit $V6evalTool::exitFatal; } } sub setroute4() { $ret = vRemote( 'route.rmt', 'cmd=add', "addrfamily=inet", "addrtype=net", "if=$if_nut_net0", "prefix=$IPSEC::IPsecAddr{IPSEC_NET2_PREFIX}", "netmask=$IPSEC::IPsecAddr{IPSEC_NET2_NETMASK}", "gateway=$IPSEC::IPsecAddr{IPSEC_ROUTER_NET0_ADDR}", ); if ($ret) { vLogHTML('NG'); exit $V6evalTool::exitFatal; } $ret = vRemote( 'route.rmt', 'cmd=add', "addrfamily=inet", "addrtype=net", "if=$if_nut_net0", "prefix=$IPSEC::IPsecAddr{IPSEC_NET4_PREFIX}", "netmask=$IPSEC::IPsecAddr{IPSEC_NET4_NETMASK}", "gateway=$IPSEC::IPsecAddr{IPSEC_ROUTER_NET0_ADDR}", ); if ($ret) { vLogHTML('NG'); exit $V6evalTool::exitFatal; } $ret = vRemote( 'route.rmt', 'cmd=add', "addrfamily=inet", "addrtype=net", "if=$if_nut_net0", "prefix=$IPSEC::IPsecAddr{IPSEC_NET6_PREFIX}", "netmask=$IPSEC::IPsecAddr{IPSEC_NET6_NETMASK}", "gateway=$IPSEC::IPsecAddr{IPSEC_ROUTER_NET0_ADDR}", ); if ($ret) { vLogHTML('NG'); exit $V6evalTool::exitFatal; } } ###################################################################### __END__ =head1 NAME RTU_SetAddress - set global address and default router for Router Tunnel Mode Test =head1 TARGET Router =head1 SYNOPSIS =begin html 
  RTU_SetAddress.seq [-tooloption ...] -pkt RTU_common.def
    -tooloption : v6eval tool option
=end html =head1 INITIALIZATION NONE =head1 TEST PROCEDURE 1. Configure network 2. Ping =head1 JUDGEMENT NONE =head1 SEE ALSO perldoc V6evalTool =cut