#!/usr/bin/perl
#
# Copyright (C) 1999,2000 Yokogawa Electric Corporation and
#                         YDC Corporation.
# All rights reserved.
# 
# Redistribution and use of this software in source and binary
# forms, with or without modification, are permitted provided that
# the following conditions and disclaimer are agreed and accepted
# by the user:
# 
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with
#    the distribution.
# 
# 3. Neither the names of the copyrighters, the name of the project
#    which is related to this software (hereinafter referred to as
#    "project") nor the names of the contributors may be used to
#    endorse or promote products derived from this software without
#    specific prior written permission.
# 
# 4. No merchantable use may be permitted without prior written
#    notification to the copyrighters.
# 
# 5. The copyrighters, the project and the contributors may prohibit
#    the use of this software at any time.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND
# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING
# BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE, ARE DISCLAIMED.  IN NO EVENT SHALL THE
# COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# $Id: routerSendUnsolRaDefault.seq,v 1.1.1.1 2000/10/31 22:39:35 sekiya Exp $

########################################################################
BEGIN { $V6evalTool::TestVersion = '$Name:  $ '; }
 
use V6evalTool;
use nd;
use ra;

ndOptions(@ARGV);

# The following generate debugging messages.
$nd::debug=$ndOpt_v|$ndOpt_vv;

# You can specifies debug optons to a remote control program.
# If you want to know more detail, please see the following:
# - V6evalTool.pm: perldoc V6evalTool
# - V6evalRemote.pm: perldoc V6evalRemote
$nd::remote_debug="-o1" if $ndOpt_vv;

$IF=Link0;
$wait_ra=$nd::MAX_INITIAL_RTR_ADVER_INTERVAL*2;
$max_ras=$nd::MAX_INITIAL_RTR_ADVERTISEMENTS*2;
$ra_interval=$nd::MAX_INITIAL_RTR_ADVER_INTERVAL;
$ra_advs=$nd::MAX_INITIAL_RTR_ADVERTISEMENTS;

#
#
#
$type=$V6evalTool::NutDef{Type};
if($type eq host) {
    vLogHTML("This test is for the router only<BR>");
    exit $V6evalTool::exitRouterOnly;
}

$type=$V6evalTool::NutDef{Type};
if($type ne router) {
    vLogHTML(ndErrmsg("ERROR: $V6evalTool::NutDef{Type}: ".
		      "Unknown target type<BR>"));
    exit $V6evalTool::exitFail;
}

#
#
#
raStartDefaultRA() || exit $V6evalTool::exitFail;

#
#
#
vCapture($IF);

#
#
#
vLogHTML("Wait for RA<BR>");
for($i=0; $i<$max_ras; $i++) {
#    $r=raRecvDefaultRA($IF, $wait_ra, 0, 0, %ret);
    $r=raRecvAnyRA($IF, $wait_ra, 0, 0, %ret);
    last if $ret{status} == 1; # timeout
    if($ret{status} != 0) {
	vLogHTML(ndErrmsg(vErrmsg(%ret))."<BR>");
	goto end;
    }
    $exit_rtn=$V6evalTool::exitFail if $r == 0;
    $n = $ret{recvCount};
    $time[$i] = $ret{"recvTime$n"};
}
if($i == 0) {
    vLogHTML(ndErrmsg("ERROR: Could not get any unsolicited RA<BR>"));
    goto end;
} elsif($i == 1) {
    vLogHTML(ndErrmsg("ERROR: Got single RA, ".
                      "could not test interval time<BR>"));
    goto end;
} elsif($i > $ra_advs) {
    vLogHTML(ndErrmsg("ERROR: Too many multicast NS (> $ra_advs)<BR>"));
    $exit_rtn=$V6evalTool::exitFail;
}

#
# Check intervals of the RAs
#
for($j=0, $over=0, $mark=''; $j<$i-1; $j++, $mark='') {
    #$delta = int(vRoundoff($time[$j+1] - $time[$j] + 0.5));
    $delta = int($time[$j+1] - $time[$j] + 0.5);
    if($delta < $ra_interval) {
        #
        # An interval > MAX_INITIAL_RTR_ADVER_INTERVAL
        #
        $over=1;
        $mark=ndErrmsg('*');
    }
    vLogHTML("Retransmit interval[$j]: $mark$delta sec.<BR>");
}
if($over) {
    vLogHTML(ndErrmsg("ERROR: Rate limit vaiolation ".
                      "(&lt; $ra_interval sec.)<BR>"));
    $exit_rtn=$V6evalTool::exitFail;
    goto end;
}

#
#
#
end:
    if($exit_rtn == $V6evalTool::exitPass) {
	vLogHTML("OK<BR>");
    } else {
	vLogHTML(ndErrmsg("NG<BR>"));
    }
    exit $exit_rtn;

########################################################################
__END__

=head1 NAME

routerSendUnsolRaDefault - verify a host sending valid RSs

=head1 TARGET

  Router Only

=head1 SYNOPSIS

  routerSendUnsolRaDefault.seq [-tooloption ...] -p routerSendUnsolRaDefault.def

=head1 INITIALIZATION

=begin html
  Start NUT advertising RAs whose parameters are as same as <A HREF="startDefaultRA.html#INITIALIZATION">those</A>.

=end html

=head1 TEST PROCEDURE

B<routerSendUnsolRaDefault> verifies that a NUT send valid RSs by the roules.

  - A host sends valid RSs whose interval is
    MAX_INITIAL_RTR_ADVERT_INTERVAL(16 sec).

  - A host sends the RSs at the most
    MAX_INITIAL_RTR_ADVERTISEMENTS (3) times.

=head1 JUDGMENT

=begin html
<PRE>
  1. NUT throw valid RAs:
     - whoes parametser are as same as <A HREF="startDefaultRA.html#INITIALIZATION">those</A>.
     - that may contain a source link-layer optoin.
     - that may contain a MTU option.
     - that may contain a Prefix optoin.
<BR>
  2. The interval between RAs is MAX_INITIAL_RTR_ADVERT_INTERVAL(16 sec).
     Because MinRtrAdvInterval(600*0.33 sec) is greater than
     MAX_INITIAL_RTR_ADVERT_INTERVAL(16 sec).
<BR>
  3. NUT throws the RAs at the most MAX_INITIAL_RTR_ADVERTISEMENTS (3) times.
</PRE>

=end html

=head1 TERMINATION

  N/A

=head1 NOTE

  TBD

=head1 REFERENCE

=begin html
<PRE>
6.2.4.  Sending Unsolicited Router Advertisements
<BR>
   <B>For the first few advertisements (up to
   MAX_INITIAL_RTR_ADVERTISEMENTS) sent from an interface when it
   becomes an advertising interface, if the randomly chosen interval is
   greater than MAX_INITIAL_RTR_ADVERT_INTERVAL, the timer SHOULD be set
   to MAX_INITIAL_RTR_ADVERT_INTERVAL instead.</B>  Using a smaller interval
   for the initial advertisements increases the likelihood of a router
   being discovered quickly when it first becomes available, in the
   presence of possible packet loss.
</PRE>

=end html

=head1 SEE ALSO

  perldoc V6evalTool
  perldoc V6evalRemote

=cut