#!/usr/bin/perl
#
# Copyright (C) 1999,2000 Yokogawa Electric Corporation and
#                         YDC Corporation.
# All rights reserved.
# 
# Redistribution and use of this software in source and binary
# forms, with or without modification, are permitted provided that
# the following conditions and disclaimer are agreed and accepted
# by the user:
# 
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with
#    the distribution.
# 
# 3. Neither the names of the copyrighters, the name of the project
#    which is related to this software (hereinafter referred to as
#    "project") nor the names of the contributors may be used to
#    endorse or promote products derived from this software without
#    specific prior written permission.
# 
# 4. No merchantable use may be permitted without prior written
#    notification to the copyrighters.
# 
# 5. The copyrighters, the project and the contributors may prohibit
#    the use of this software at any time.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND
# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING
# BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE, ARE DISCLAIMED.  IN NO EVENT SHALL THE
# COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# $Id: startRedirect.seq,v 1.1.1.1 2000/10/31 22:39:35 sekiya Exp $

########################################################################
BEGIN { $V6evalTool::TestVersion = '$Name:  $ '; }
 
use V6evalTool;
use nd;
use routerRedirect;

ndOptions(@ARGV);

# The following generate debugging messages.
$nd::debug=$ndOpt_v|$ndOpt_vv;

# You can specifies debug optons to a remote control program.
# If you want to know more detail, please see the following:
# - V6evalTool.pm: perldoc V6evalTool
# - V6evalRemote.pm: perldoc V6evalRemote
$nd::remote_debug="-o1" if $ndOpt_vv;

#
#
#
$type=$V6evalTool::NutDef{Type};
if($type eq host) {
    vLogHTML("This test is for the router only<BR>");
    exit $V6evalTool::exitRouterOnly;
}

$type=$V6evalTool::NutDef{Type};
if($type ne router) {
    vLogHTML(ndErrmsg("ERROR: $V6evalTool::NutDef{Type}: ".
		      "Unknown target type<BR>"));
    exit $V6evalTool::exitFail;
}

#
#
#
$IF=Link0;
vCapture($IF);

#
#
#
rrdSetRdEnv($IF) || goto error;

#
#
#
vLogHTML("OK<BR>");
exit $V6evalTool::exitIgnore;

error:
    vLogHTML(ndErrmsg("NG<BR>"));
    exit $V6evalTool::exitFail;

########################################################################
__END__

=head1 NAME

startRedirect - TBD

=head1 TARGET

  Router Only

=head1 SYNOPSIS

  startRedirect.seq [-tooloption ...] -p startRedirect.def

=head1 INITIALIZATION

=begin html
The initialization configures NUT as the followings:
<UL>
<LI>Assign "3ffe:501:ffff:108:200:ff:fe00:a0a0" to the i/f specified as Link0.
<LI>Set the default route to R1's link-local
</UL>
<PRE>
        [NUT]
          | 3ffe:501:ffff:100::ifid
          | <B>3ffe:501:ffff:108:200:ff:fe00:a0a0</B>
          | <B>default route to R1's link-local</B>
          |                                                  3ffe:501:ffff:100/64
  ---+----+----+------------------------------------+------- 3ffe:501:ffff:108/64
     |         |                                    |
     |         | 3ffe:501:ffff:100:200:ff:fe00:a1a1 | 3ffe:501:ffff:100:200:ff:fe00:a2a2
     |         | 3ffe:501:ffff:108:200:ff:fe00:a1a1 | 3ffe:501:ffff:108:200:ff:fe00:a2a2
    [TN]      [R1]                                 [H2]
               |
               |
         ------+------ 3ffe:501:ffff:109/64
               |
               | 3ffe:501:ffff:109:200:ff:fe00:a3a3
              [H3]
</PRE>

=end html

=head1 TEST PROCEDURE

  N/A

=head1 JUDGMENT

  N/A

=head1 TERMINATION

  N/A

=head1 NOTE

  TBD

=head1 SEE ALSO

  perldoc V6evalTool
  perldoc V6evalRemote

=cut