#!/usr/bin/perl
#
# Copyright (C) 1999,2000 Yokogawa Electric Corporation and
#                         YDC Corporation.
# All rights reserved.
# 
# Redistribution and use of this software in source and binary
# forms, with or without modification, are permitted provided that
# the following conditions and disclaimer are agreed and accepted
# by the user:
# 
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with
#    the distribution.
# 
# 3. Neither the names of the copyrighters, the name of the project
#    which is related to this software (hereinafter referred to as
#    "project") nor the names of the contributors may be used to
#    endorse or promote products derived from this software without
#    specific prior written permission.
# 
# 4. No merchantable use may be permitted without prior written
#    notification to the copyrighters.
# 
# 5. The copyrighters, the project and the contributors may prohibit
#    the use of this software at any time.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND
# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING
# BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE, ARE DISCLAIMED.  IN NO EVENT SHALL THE
# COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# $Id: FH_1stOnly.seq,v 1.1.1.1 2000/10/31 22:39:51 sekiya Exp $
#
######################################################################
BEGIN {
	$V6evalTool::TestVersion = '$Name:  $';
}

use V6evalTool;

%pktdesc = (
	echo_request		=> 'Send Echo Request (Preparation)',
	echo_reply		=> 'Recv Echo Reply',
	ns			=> 'Recv Neighbor Solicitation',
	na			=> 'Send Neighbor Advertisement',
	echo_request_1st	=> 'Send Echo Request (1st fragment only)',
	time_exceeded_1st	=> 'Recv ICMP Error (Time Exceeded, fragment reassembly time exceeded)',
);

$IF = Link0;

vCapture($IF);

#----- preparation

vLogHTML('<B>Begin Preparation</B>');

vSend($IF, echo_request);

%ret = vRecv($IF, 5, 0, 0, ns, echo_reply);
if ($ret{status} != 0) {
	vLogHTML('<FONT COLOR="#FF0000">NG</FONT>');
	exit $V6evalTool::exitFail;
}
if ($ret{recvFrame} eq 'ns') {
	vSend($IF, na);
	%ret = vRecv($IF, 5, 0, 0, echo_reply);
	if ($ret{status} != 0) {
		vLogHTML('<FONT COLOR="#FF0000">NG</FONT>');
		exit $V6evalTool::exitFail;
	}
}
if ($ret{recvFrame} ne 'echo_reply') {
	vLogHTML('<FONT COLOR="#FF0000">NG</FONT>');
	exit $V6evalTool::exitFail;
}

vSend($IF, na);

vLogHTML('<B>End Preparation</B>');

#----- main test

vSend($IF, echo_request_1st);

%ret = vRecv($IF, 65, 0, 0, time_exceeded_1st);
if ($ret{status} == 0 && $ret{recvFrame} eq 'time_exceeded_1st') {
	vLogHTML('OK');
	exit $V6evalTool::exitPass;
}

vLogHTML('<FONT COLOR="#FF0000">NG</FONT>');
vSleep(65, "Discard Unexpected 'ICMP Time Exceeded' message (60+5 sec)");
exit $V6evalTool::exitFail;

######################################################################
__END__

=head1 NAME

  FH_1stOnly - check Fragment Reassembly (1st fragment only)

=head1 TARGET

  Host and Router

=head1 SYNOPSIS

=begin html
<PRE>
  <A HREF="./FH_1stOnly.seq">FH_1stOnly.seq</A> [-tooloption ...] -pkt <A HREF="./Fragment.def">Fragment.def</A>
    -tooloption : v6eval tool option
</PRE>

=end html

=head1 INITIALIZATION

  1. Ping to Target (create Neighbor Cache Entries, if not exist)
  2. Override Neighbor Cache Entries

=head1 TEST PROCEDURE

  Tester                      Target
    |                           |
    |-------------------------->|
    |   Echo Request (1st)      |
    |                           |
    |                           |
    |<--------------------------|
    |   ICMP Error              |
    |                           |
    |                           |
    v                           v


  1. Send Echo Request (1st fragment)
  2. Wait ICMP Error (timeout = 60 sec)
  3. Receive ICMP Error

=head1 JUDGEMENT

  PASS: ICMP Error Received

        IPv6 Header
            Version             = 6
            Traffic Class       = 0
            FlowLabel           = 0
            PayloadLength       = 16
            NextHeader          = 58 (ICMP)
            SourceAddress       = Target Link Local Address
            Destination Address = Tester Link Local Address

        ICMP Error
            Type           = 3 (Time Exceeded)
            Code           = 1 (fragment reassembly time exceeded)
            Checksum       = (auto)
            PayloadData    = (Echo Request)

=head1 SEE ALSO

  perldoc V6evalTool

=cut