#!/usr/bin/perl
#
# Copyright (C) 1999,2000 Yokogawa Electric Corporation and
#                         YDC Corporation.
# All rights reserved.
# 
# Redistribution and use of this software in source and binary
# forms, with or without modification, are permitted provided that
# the following conditions and disclaimer are agreed and accepted
# by the user:
# 
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with
#    the distribution.
# 
# 3. Neither the names of the copyrighters, the name of the project
#    which is related to this software (hereinafter referred to as
#    "project") nor the names of the contributors may be used to
#    endorse or promote products derived from this software without
#    specific prior written permission.
# 
# 4. No merchantable use may be permitted without prior written
#    notification to the copyrighters.
# 
# 5. The copyrighters, the project and the contributors may prohibit
#    the use of this software at any time.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND
# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING
# BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE, ARE DISCLAIMED.  IN NO EVENT SHALL THE
# COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# $Id: initialize.seq,v 1.1.1.1 2000/10/31 22:39:56 sekiya Exp $
########################################################################
BEGIN { $V6evalTool::TestVersion = '$Name:  $'; }
use V6evalTool;
use tunnel;

if($tunnel::type eq "host"){
	$IF_TUNNEL = $tunnel::IF_ID_0;
	$IF_IPV6   = $tunnel::IF_ID_0;
}
else { # router
	$IF_TUNNEL = $tunnel::IF_ID_1;
	$IF_IPV6   = $tunnel::IF_ID_0;
}
vCapture($IF_IPV6);
vCapture($IF_TUNNEL);

$ret=reboot();
if( $ret !=$V6evalTool::exitIgnore) {
        vLogHTML("<FONT COLOR=#FF0000>Can not reboot NUT !!</FONT>");
        goto error_fatal;
}else {
	vLogHTML("<H4>--- reboot NUT ---</H4>");
}

$ret=config_automatic_tunnel($IF_TUNNEL);
if( $ret !=0) {
        vLogHTML("<FONT COLOR=#FF0000>Can not configure automatic tunnel !!</FONT>");
}else {
	vLogHTML("<H4>--- TN can configure tunnel between TN and NUT ---</H4>");
}

$ret=config_host_v4($IF_TUNNEL);
if( $ret !=0) {
        vLogHTML("<FONT COLOR=#FF0000>NUT can not be configured v4 routing !!</FONT>");
        goto error_fatal;
}else {
	vLogHTML("<H4>--- NUT can be configured v4 routing ---</H4>");
}

$ret=config_host_v6($IF_IPV6);
if( $ret !=0) {
        vLogHTML("<FONT COLOR=#FF0000>NUT can not be configured v6 routing !!</FONT>");
        goto error_fatal;
}else {
        vLogHTML("<H4>--- NUT can be configured v6 routing ---</H4>");
}

$ret=config_tunnel_offlink($IF_TUNNEL);
if( $ret !=0) {
        vLogHTML("<FONT COLOR=#FF0000>Can not configure tunnel !!</FONT>");
        goto error_fatal;
}else {
	vLogHTML("<H4>--- TN can configure tunnel between TN and NUT ---</H4>");
}

vLogHTML("<H3>OK</H3>");
exit $V6evalTool::exitIgnore;

error_fatal:

vLogHTML("<H3>NG</H3>");
vErrmsg(%ret);
exit $V6evalTool::exitFatal;



########################################################################
__END__

=head1 NAME

	initialize.seq - initialization tunnel environment test

=head1 TARGET

	Host and Router

=head1 SYNOPSIS

	This script configures for the tunnel.
	In First, reboot NUT.
	Configures,
		- assign IPv4 compatible IPv6 address to NUT
		- assign IPv4 address and set default route for IPv4
		- assign IPv6 address and set default route for IPv6
		- set up IPv6 over IPv4 configured tunnel
	and make TN's address Neighbor Cache Entry and ARP table


=head1 SEE ALSO

	perldoc V6evalTool

=cut