#!/usr/bin/perl
#
# $Copyright$
#
# $Id: hostSendRsAfterSolicitedRa.seq,v 1.1.1.1 2000/10/31 22:39:00 sekiya Exp $
########################################################################
BEGIN { $V6evalTool::TestVersion = '$Name: $ '; }
use V6evalTool;
use nd;
ndOptions(@ARGV);
# The following generate debugging messages.
$nd::debug=$ndOpt_v|$ndOpt_vv;
# You can specifies debug optons to a remote control program.
# If you want to know more detail, please see the following:
# - V6evalTool.pm: perldoc V6evalTool
# - V6evalRemote.pm: perldoc V6evalRemote
$nd::remote_debug="-o1" if $ndOpt_vv;
$IF=Link0;
$ra_interval=1;
$wait_reboot=600;
$wait_dad_rs=120;
$wait_rs = $nd::MAX_RTR_SOLICITATION_DELAY +
($nd::RTR_SOLICITATION_INTERVAL * $nd::MAX_RTR_SOLICITATIONS);
@valid_ras=(
ra_tn2allnode,
ra_tn2allnode_sll,
);
@title_valid_ras=(
"RA w/o SLLA",
"RA w/ SLLA",
);
@invalid_ras=(
ra_tn2allnode_invalid_src,
ra_tn2allnode_invalid_hoplimit,
ra_tn2allnode_invalid_chksum,
ra_tn2allnode_invalid_icmpcode,
);
@title_invalid_ras=(
"RA, src!=link-local (INVALID)",
"RA, hop limit != 255 (INVALID)",
"RA, invalid checksum (INVALID)",
"RA, icmp code != 0 (INVALID)",
);
#
#
#
$exit_rtn=$V6evalTool::exitPass;
#
#
#
$type=$V6evalTool::NutDef{Type};
if($type eq router) {
vLogHTML("This test is for the host only
");
exit $V6evalTool::exitHostOnly;
}
$type=$V6evalTool::NutDef{Type};
if($type ne host) {
vLogHTML(ndErrmsg("ERROR: $V6evalTool::NutDef{Type}: ".
"Unknown target type
"));
exit $V6evalTool::exitFail;
}
#
#
#
$idx=0;
$i=0;
foreach(@valid_ras) {
vLogHTML("
=end html =head2 After receiving an invalid RA =begin html
TN NUT --------------------------
<=== Judgment #1: RS ==== src=unspecified or NUT's link-local dst=all-router w/o or w/ SLLA
==== Valid RA ===> src=link-local dst=all-node w/ or w/o SLLA timeout=600 sec.
Judgment #2: NUT does NOT captures any packet from NUT within 4 sec.
=end html =head1 JUDGMENT =begin html
TN NUT --------------------------
<=== Judgment #1: RS ==== src=unspecified or NUT's link-local dst=all-router w/o or w/ SLLA timeout=600 sec.
==== Invalid RA ===>
Judgment #2: NUT captures at the least one RS from NUT within 4 sec.
1. NUT sends a valid RS:=end html =head1 TERMINATION Send RA with RouterLifetime=0 to clear the Default Router List. =head1 NOTE The test invokes the following command: - reboot =head1 SEE ALSO perldoc V6evalTool perldoc V6evalRemote =cut
A) src=unspecified, dst=all-router, w/o SLLA B) src=NUT's link-local, dst=all-router, w/o SLLA C) src=NUT's link-local, dst=all-router, w/ SLLA
2. Sending RSs
6.3.7. Sending Router Solicitations
Once the host sends a Router Solicitation, and receives a valid Router Advertisement with a non-zero Router Lifetime, the host MUST desist from sending additional solicitations on that interface, until the next time one of the above events occurs. Moreover, a host SHOULD send at least one solicitation in the case where an advertisement is received prior to having sent a solicitation. Unsolicited Router Advertisements may be incomplete (see Section 6.2.3); solicited advertisements are expected to contain complete information.
TABLE. Received a solicited RA vs. Sendgin a RS =============================================================+========= Received unsolicited RA by NUT | Send RS -----------+----------+-------+-------------------+----------+ by the Src | Dst | SLLA | Other | Validity | NUT ? ===========+==========+=======+===================+==========+========= link-local | all-node | none | | valid | no -----------+----------+-------+-------------------+----------+--------- link-local | all-node | exist | | valid | no -----------+----------+-------+-------------------+----------+--------- *global | all-node | none | | invalid | yes -----------+----------+-------+-------------------+----------+--------- link-local | all-node | none | *hop limit=2 | invalid | yes -----------+----------+-------+-------------------+----------+--------- link-local | all-node | none | *invalid checksum | invalid | yes -----------+----------+-------+-------------------+----------+--------- link-local | all-node | none | *icmp code=1 | invalid | yes ===========+==========+=======+===================+==========+=========