// // Copyright (C) 1999,2000 Yokogawa Electric Corporation and // YDC Corporation. // All rights reserved. // // Redistribution and use of this software in source and binary // forms, with or without modification, are permitted provided that // the following conditions and disclaimer are agreed and accepted // by the user: // // 1. Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // // 2. Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in // the documentation and/or other materials provided with // the distribution. // // 3. Neither the names of the copyrighters, the name of the project // which is related to this software (hereinafter referred to as // "project") nor the names of the contributors may be used to // endorse or promote products derived from this software without // specific prior written permission. // // 4. No merchantable use may be permitted without prior written // notification to the copyrighters. // // 5. The copyrighters, the project and the contributors may prohibit // the use of this software at any time. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND // CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING // BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS // FOR A PARTICULAR PURPOSE, ARE DISCLAIMED. IN NO EVENT SHALL THE // COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, // INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES // (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) // HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, // STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING // IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE // POSSIBILITY OF SUCH DAMAGE. // // $Name: $ // // $Id: HTR_A_DM_DSTH_opttype.def,v 1.1.1.1 2000/09/28 00:16:01 sekiya Exp $ // #include "./HTR_A_common.def" //====================================================================== // // AH/ESP definition // //====================================================================== // // Dst Opt Hdr predefinition // // highest-order three bits of option type // 00x - skip over this option and continue processing the header. // xx0 - Option Data does not change en-route // xx1 - Option Data may change en-route // Type000 Hdr_Destination opt_Type000 { option = _Type000; } Opt_ANY _Type000 { OptionType = 0x02; data = {0x0f,0x0f,0x00,0x00}; } // Type001 Hdr_Destination opt_Type001 { option = _Type001; } Opt_ANY _Type001 { OptionType = 0x22; data = {0x0f,0x0f,0x00,0x00}; } //====================================================================== // // Real packet definition with IPsec AH // FEM_icmp6_echo_request_exth( echo_request_from_host1_dstopt_ah, hether_router2nut, { _SRC(v6(IPSEC_HOST1_NET5_ADDR)); _DST(v6(IPSEC_NUT_NET3_ADDR)); }, { header = _HDR_IPV6_NAME(echo_request_from_host1_dstopt_ah); exthdr = opt_Type000; exthdr = ah_from_host_sn2; upper = _ICMPV6_NAME(echo_request_from_host1_dstopt_ah); }, { payload = IPSEC_ECHO_DATA; } ) FEM_icmp6_echo_request_exth( echo_request_from_host1_ah_real_000, hether_router2nut, { _SRC(v6(IPSEC_HOST1_NET5_ADDR)); _DST(v6(IPSEC_NUT_NET3_ADDR)); }, { header = _HDR_IPV6_NAME(echo_request_from_host1_ah_real_000); exthdr = opt_Type000; exthdr = ah_from_host_sn3; upper = _ICMPV6_NAME(echo_request_from_host1_ah_real_000); }, { payload = IPSEC_ECHO_DATA; } ) FEM_icmp6_echo_request_exth( echo_request_from_host1_ah_real_001, hether_router2nut, { _SRC(v6(IPSEC_HOST1_NET5_ADDR)); _DST(v6(IPSEC_NUT_NET3_ADDR)); }, { header = _HDR_IPV6_NAME(echo_request_from_host1_ah_real_001); exthdr = opt_Type001; exthdr = ah_from_host_sn4; upper = _ICMPV6_NAME(echo_request_from_host1_ah_real_001); }, { payload = IPSEC_ECHO_DATA; } ) //====================================================================== // // Modified packet definition with IPsec AH // // Common use Ether Header Hdr_Ether hether_router2nut_0x86dd { SourceAddress=ether(IPSEC_ROUTER_NET3_MAC_ADDR); DestinationAddress=nutether(); Type=0x86dd; // need to specify IPv6 } // Dst Opt Hdr option type is modified Frame_Ether echo_request_from_host1_ah_dm_dsth_000opttype { header=hether_router2nut_0x86dd; packet=echo_request_from_host1_ah_modpkt1; } Payload echo_request_from_host1_ah_modpkt1 { data=substr(echo_request_from_host1_ah_real_000, 14, 42); data=0x22; // option type modified, orig=0x02 data=0x04; // option len data={0x0f, 0x0f, 0x00, 0x00}; // option data data=substr(echo_request_from_host1_ah_real_000, 62, 40); } // Dst Opt Hdr option type is modified Frame_Ether echo_request_from_host1_ah_dm_dsth_001opttype { header=hether_router2nut_0x86dd; packet=echo_request_from_host1_ah_modpkt2; } Payload echo_request_from_host1_ah_modpkt2 { data=substr(echo_request_from_host1_ah_real_001, 14, 42); data=0x23; // option type modified, orig=0x22 data=0x04; // option len data={0x0f, 0x0f, 0x00, 0x00}; // option data data=substr(echo_request_from_host1_ah_real_001, 62, 40); } //end