(usagi-users 00977) radvd & ICMPv6 checksum errors

[Luis Peralta <peralta@xxxxxxxxxxxxxxxx>]

Hi,

   I'm not able to get USAGI stack to autoconfigure my IPv6 network. When
I start radvd I get this message:

[Nov 06 10:52:03] radvd: our AdvCurHopLimit on eth0 doesn't agree with
fe80::2a0:ccff:fe53:cc08

   And when a node tries to get its address, I get this on client console:

ICMPv6 checksum failed [fe80:0000:0000:0000:02a0:ccff:fe53:cc08 >
ff02:0000:0000:0000:0000:0000:0000:0001]

   Which I guess is part of the autoconfig process.  Configuring the node
by hand or using link-local addresses is ok. The setup I have worked just 
fine with non-USAGI kernels. Any ideas?
-- 
                                          luis peralta / jaxp

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
CS Student | peralta at spisa dot act dot uji dot es
           | http://spisa.act.uji.es/~peralta/