(usagi-users 02375) TAHI tests on USAGI code, please help

[Derek Smalls <dsmalls321@xxxxxxxxx>]

Hi, 

I am running the TAHI test suite on the USAGI patches
for Linux 2.4.20 and the failure rate I'm getting is
significantly higher than the one reported. For the
router configuration in the Neighbor Discovery tests I
see ~30% failure, for the ICMP tests -- ~50% failure,
and for the Specifications tests -- ~30% failure. 

I am wondering if there is any non-obvious
configuration of the Linux box that needs to be done
for TAHI, please let me know if this is the case. 


For the reference, here's what I use:
************************************************
On the Linux box:

eth1      Link encap:Ethernet  HWaddr
00:E0:7D:D3:28:D0 
          inet addr:1.1.1.1  Bcast:1.255.255.255 
Mask:255.0.0.0 
          inet6 addr: 3ffe:501:ffff:100::1/64
Scope:Global 
          inet6 addr: fe80::2e0:7dff:fed3:28d0/64
Scope:Link 
  
#more /etc/sysconfig/network-scripts/ifcfg-eth1 
DEVICE='eth1' 
IPV6INIT="yes" 
IPV6ADDR="3ffe:501:ffff:100::1/64" 
IPV6_ROUTER=yes 

# more /etc/sysconfig/network 
NETWORKING=yes 
NETWORKING_IPV6=yes 
FORWARD_IPV4=true 
IPV6FORWARDING=yes 
IPV6_DEFAULTDEV='eth1' 

NUT (Node under test): Linux version 2.4.20 with the
latest USAGI patches 

TN (Tester Node): FreeBSD 4.3-RELEASE, Tahi   Release
1.3 

Linux kernel built with these IPv6 flags:

CONFIG_IPV6=y 
CONFIG_IPV6_DROP_FAKE_V4MAPPED=y 
ONFIG_IPV6_ANYCAST=y 
CONFIG_IPV6_ANYCAST_GROUP=y 
CONFIG_IPV6_PREFIXLIST=y 
CONFIG_IPV6_ROUTER_PREF=y 
CONFIG_IPV6_NEW_ROUNDROBIN=y 
CONFIG_IPV6_ROUTE_INFO=y 
CONFIG_IPV6_NODEINFO=y 
************************************************

Any input will be helpful, thanks in advance.


=====
--
Derek J. Smalls
dsmalls321@xxxxxxxxx

__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com