(usagi-users 02380) Re: TAHI tests on USAGI code, please help

[Derek Smalls <dsmalls321@xxxxxxxxx>]

No Mobile IPv6, just the bare bones functionality. 

--- Michael <michael.fu@xxxxxxxxxxxxxxxxxx> wrote:
> Are you running Mobile IPv6 at the same time?
> 
> 
> Michael Fu
> 
> Not speaking for Intel, all opinions are my own
> 
> 
> On Thu, 2003-05-15 at 04:55, Derek Smalls wrote:
> > Hi, 
> > 
> > I am running the TAHI test suite on the USAGI
> patches
> > for Linux 2.4.20 and the failure rate I'm getting
> is
> > significantly higher than the one reported. For
> the
> > router configuration in the Neighbor Discovery
> tests I
> > see ~30% failure, for the ICMP tests -- ~50%
> failure,
> > and for the Specifications tests -- ~30% failure. 
> > 
> > I am wondering if there is any non-obvious
> > configuration of the Linux box that needs to be
> done
> > for TAHI, please let me know if this is the case. 
> > 
> > 
> > For the reference, here's what I use:
> > ************************************************
> > On the Linux box:
> > 
> > eth1      Link encap:Ethernet  HWaddr
> > 00:E0:7D:D3:28:D0 
> >           inet addr:1.1.1.1  Bcast:1.255.255.255 
> > Mask:255.0.0.0 
> >           inet6 addr: 3ffe:501:ffff:100::1/64
> > Scope:Global 
> >           inet6 addr: fe80::2e0:7dff:fed3:28d0/64
> > Scope:Link 
> >   
> > #more /etc/sysconfig/network-scripts/ifcfg-eth1 
> > DEVICE='eth1' 
> > IPV6INIT="yes" 
> > IPV6ADDR="3ffe:501:ffff:100::1/64" 
> > IPV6_ROUTER=yes 
> > 
> > # more /etc/sysconfig/network 
> > NETWORKING=yes 
> > NETWORKING_IPV6=yes 
> > FORWARD_IPV4=true 
> > IPV6FORWARDING=yes 
> > IPV6_DEFAULTDEV='eth1' 
> > 
> > NUT (Node under test): Linux version 2.4.20 with
> the
> > latest USAGI patches 
> > 
> > TN (Tester Node): FreeBSD 4.3-RELEASE, Tahi  
> Release
> > 1.3 
> > 
> > Linux kernel built with these IPv6 flags:
> > 
> > CONFIG_IPV6=y 
> > CONFIG_IPV6_DROP_FAKE_V4MAPPED=y 
> > ONFIG_IPV6_ANYCAST=y 
> > CONFIG_IPV6_ANYCAST_GROUP=y 
> > CONFIG_IPV6_PREFIXLIST=y 
> > CONFIG_IPV6_ROUTER_PREF=y 
> > CONFIG_IPV6_NEW_ROUNDROBIN=y 
> > CONFIG_IPV6_ROUTE_INFO=y 
> > CONFIG_IPV6_NODEINFO=y 
> > ************************************************
> > 
> > Any input will be helpful, thanks in advance.
> > 
> > 
> > =====
> > --
> > Derek J. Smalls
> > dsmalls321@xxxxxxxxx
> > 
> > __________________________________
> > Do you Yahoo!?
> > The New Yahoo! Search - Faster. Easier. Bingo.
> > http://search.yahoo.com
> > 
> 


=====
--
Derek J. Smalls
dsmalls321@xxxxxxxxx

__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com