(usagi-users 02654) Re: Problems with Routing

[Jedediah Ferguson <jed@xxxxxxxx>]

Ok I switched up the addresses and no luck!

Host 1: 3ffe:ffff:0100:f101::1/64
Host 2: 3ffe:ffff:0100:f102::2/64

Router:	3ffe:ffff:0100:f101::3/64
	3ffe:ffff:0100:f102::4/64

Unless I again selected reserved addresses.  I just want to be able to
send traffic from node 1 to node 2 via the router.

Jed


On Thu, 2003-11-27 at 13:59, Jedediah Ferguson wrote:
> What would be a more appropriate address selection?
> 
> Jed
> 
> 
> On Thu, 2003-11-27 at 13:34, Yang Hsiung wrote:
> > I wonder that the "fe8x/10" are all dropped in the link-local
> > addresses, which are NOT routable.
> > 
> > Yang
> > 
> > -----Original Message-----
> > From: Jedediah Ferguson [mailto:jed@xxxxxxxx]
> > Sent: Thursday, November 27, 2003 7:21 AM
> > To: usagi-users@xxxxxxxxxxxxxx
> > Subject: (usagi-users 02651) Problems with Routing
> > 
> > 
> > Hello Users Group:
> > 
> > I have configured a Usagi modified kernel from the last stable source
> > release (February 14, 2003).  I can't get any IPv6 forwarding to occur. 
> > The routes are configured on the host machines and the router machine
> > has IPV6FORWARDING=yes in /etc/sysconfig/network.  Monitoring with
> > Ethereal I can see traffic directed toward the router destined for
> > machines on either side but the router simply is not fowarding the
> > traffic.
> > 
> > Low Quality Network Schematic
> > 	Subnet			Subnet
> > 	fe82::/64		fe81::/64
> > Host1 ----------  Router  ------------- Host2
> > 
> > Host1 : fe82::2/64
> > Host2 : fe81::1/64
> > 
> > Router: fe81::3/64
> > 	fe82::4/64
> > 
> > /etc/sysconfig/network
> > 
> > NETWORKING=yes
> > NETWORKING_IPV6=yes
> > IPV6INIT=yes
> > IPV6FORWARDING=yes
> > HOSTNAME=localhost.localdomain
> > 
> > 
> > 
> > Routing Table
> > 
> > fe80::/64 dev eth0  proto kernel  metric 256  mtu 1500 advmss 1440
> > fe80::/64 dev eth1  proto kernel  metric 256  mtu 1500 advmss 1440
> > fe80::/64 dev eth2  proto kernel  metric 256  mtu 1500 advmss 1440
> > fe81::/64 dev eth1  proto kernel  metric 256  mtu 1500 advmss 1440
> > fe82::/64 dev eth2  proto kernel  metric 256  mtu 1500 advmss 1440
> > ff00::/8 dev eth0  proto kernel  metric 256  mtu 1500 advmss 1440
> > ff00::/8 dev eth1  proto kernel  metric 256  mtu 1500 advmss 1440
> > ff00::/8 dev eth2  proto kernel  metric 256  mtu 1500 advmss 1440
> > default dev eth1  proto kernel  metric 256  mtu 1500 advmss 1440
> > 
> > Neighbour Table
> > 
> > fe81::1 dev eth1 lladdr 00:05:5d:2d:1f:72 nud stale
> > fe82::2 dev eth2 lladdr 00:0c:42:02:02:58 nud stale
> > 
> > I am convinced there is something simple I have not done.  The tutorials
> > I have read indicate that is the routes are present and forwarding is
> > enabled this should work.
> > 
> > Any assistance would be much appreciated.
> > 
> > 
> > Thanks,
> > 
> > 
> > Jedediah Ferguson
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> >   
> > 
> > 
> > 
> > 
> 
>