(usagi-users 02982) Re: radvd client problems ....

[Romain KUNTZ <kuntz@xxxxxxxxxxxxxx>]

Hi,

> Once again thanks for your valuable advice. I have edited the file
> following your recomendations. I did so by doing the changes
> separately and then recompiling creating two different kernels.
> Unfortunately when I carried out the tests I was unable to run IPv6
> Fowarding=1 and process RA updates (accept_ra=1) . I can see the
> radvd updates, yet the interface does not process them. Anything else
> you think I should be aware of ?

Did you modify the file following my second mail ? If yes, if you want
to process RA, accept_ra must be > 1, so you can try this (replace eth0
with the name of your NIC) :
# sysctl -w net.ipv6.conf.eth0.accept_ra=2

and RA will be processed even if forwarding is set to 1.
It works fine on my computer.

> As you can see I get two "Site" addresses. When I use a DHCPv6
> server connected to the internet and acting as a Proxy, I get 2-Site
> addresses + 2-Global addresses. Any hints in where the problem might
> be ?

I'm afraid I cannot help you for this problem... sorry !

Regards,

-- 
Romain KUNTZ
kuntz@xxxxxxxxxxxxxx