(usagi-users 02985) Re: radvd client problems ....

["Daniel Tyrode" <dtyrode4@xxxxxxxxxxx>]

Hi Romain,

There must be something I missed. I will recompile the kernel again and let
you know if the problem persists.

Many thanks and regards,

Daniel

----- Original Message ----- 
From: "Romain KUNTZ" <kuntz@xxxxxxxxxxxxxx>
To: <usagi-users@xxxxxxxxxxxxxx>
Sent: Tuesday, June 29, 2004 3:20 AM
Subject: (usagi-users 02982) Re: radvd client problems ....


> Hi,
>
> > Once again thanks for your valuable advice. I have edited the file
> > following your recomendations. I did so by doing the changes
> > separately and then recompiling creating two different kernels.
> > Unfortunately when I carried out the tests I was unable to run IPv6
> > Fowarding=1 and process RA updates (accept_ra=1) . I can see the
> > radvd updates, yet the interface does not process them. Anything else
> > you think I should be aware of ?
>
> Did you modify the file following my second mail ? If yes, if you want
> to process RA, accept_ra must be > 1, so you can try this (replace eth0
> with the name of your NIC) :
> # sysctl -w net.ipv6.conf.eth0.accept_ra=2
>
> and RA will be processed even if forwarding is set to 1.
> It works fine on my computer.
>
> > As you can see I get two "Site" addresses. When I use a DHCPv6
> > server connected to the internet and acting as a Proxy, I get 2-Site
> > addresses + 2-Global addresses. Any hints in where the problem might
> > be ?
>
> I'm afraid I cannot help you for this problem... sorry !
>
> Regards,
>
> -- 
> Romain KUNTZ
> kuntz@xxxxxxxxxxxxxx
>
>
>