I’m running the 2.4.27-rc3 kernel with the corresponding
USAGI patch which is advertised to be IPv6 ready. The IPv6
conformance tests fails the “Verify RouterLifetime
when receiving RA with RouterLifetime=5” test every time.
The output from the test has been attached below. If you need me
to send the captured packets, I will do that.
Any input would be appreciated.
Thanks in advance,
Chris
Here is the output from the test:
13:22:58Start
Initialization
Trying to reboot NUT
13:22:58 vRemote(reboot.rmt) ``/usr/local/v6eval//bin/manual//reboot.rmt -t
manual -u root -p qV3f71sc -d cuaa0 -o 1 -s 9600 timeout=300''
reboot>
reboot> Reboot NUT.
reboot> * Wait until NUT boot up completely.
reboot> Ex.) Wait until catch up login prompt.
reboot>
reboot> Press Enter key for continue.
reboot>
Target: Reboot
13:24:24 Wait 10 second 13:24:34Start Capturing Packets (Link0)
13:24:34 vSend(Link0,ra_tn2allnode_sll)
Router TN Send
RA w/ SLL
Wait for DAD NSs
13:24:34 vRecv(Link0,) timeout:3 cntLimit:0 seektime:0
recv a packet at
13:24:35
vRecv() return status=1 13:24:37 vSend(Link0,echoreq_tn2nut)
send
echoreq_tn2nut
13:24:38 vRecv(Link0,ns_nut2tn ns_nut2tn_sll echorep_nut2tn) timeout:5
cntLimit:1 seektime:1119288278.120184
recv
echorep_nut2tn
13:24:38 vSend(Link0,unicast_na_tn2nut_RSO_tll)
Router TN send
NA
Test
13:24:38 vSend(Link0,echo_request_x2nut_via_w)
Send off-link
echo-requests
13:24:38 vRecv(Link0,echo_reply_nut2x_via_tn multicast_ns_nut2wsolnode) timeout:2
cntLimit:1 seektime:1119288278.789899
Got echo-reply
thrown to Router TN
Wait (9 sec)to ignore unicast NSs if any
13:24:39 vRecv(Link0,) timeout:9 cntLimit:0 seektime:0
vRecv() return status=1 13:24:48 vSend(Link0,ra_tn2allnode_sll_clear)
Router TN send
RA w/ RouterLifetime=5
Wait for expiring RouterLifetime (7 sec)
13:24:48 Wait 7 second 13:24:55 vSend(Link0,echo_request_x2nut_via_w)
Send off-link
echo-requests
13:24:55 vRecv(Link0,echo_reply_nut2x_via_tn multicast_ns_nut2wsolnode)
timeout:2 cntLimit:1 seektime:1119288295.512747
Got echo-reply
thrown to Router TN
Wait (9 sec)to ignore unicast NSs if any
13:24:55 vRecv(Link0,) timeout:9 cntLimit:0 seektime:0
vRecv() return status=1
ERROR: NUT doesn't recognize RA
(RouterLifetime=5)
Termination
13:25:04 vSend(Link0,ra_tn2allnode_clrrtr)
Clear Router TN
form the Default Router List
*** NG ***
13:25:05 vRecv(Link0,) timeout:9 cntLimit:0 seektime:0
vRecv() return status=1 13:25:14End