[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

(usagi-users 03961) Re: AW: How to enable IPv6 only on a particular interface

To: usagi-users@xxxxxxxxxxxxxx
Subject: (usagi-users 03961) Re: AW: How to enable IPv6 only on a particular interface
From: Noriaki TAKAMIYA <takamiya@xxxxxxxxxxxxx>
Date: Thu, 04 Oct 2007 20:16:46 +0900 (JST)
In-reply-to: <5D292AE4F796DF4BB3BE43548D642D477EFC02@SLFSNX.rcs.alcatel-research.de>
References: <20071004.115141.957834800.takamiya@po.ntts.co.jp> <117534.95989.qm@web8906.mail.in.yahoo.com> <5D292AE4F796DF4BB3BE43548D642D477EFC02@SLFSNX.rcs.alcatel-research.de>
Reply-to: usagi-users@xxxxxxxxxxxxxx

>> Thu, 4 Oct 2007 09:42:05 +0200 頃、
>> [Subject: (usagi-users 03960) AW: How to enable IPv6 only on a particular interface] において、
>> "HOFMANN, Dirk" <Dirk.Hofmann@xxxxxxxxxxxxxxxxx>さんが書きました....

> Hi Pramendra,
> 
> that should be no problem: If you configure manually IPv6 addresses only on one interface and delete all IPv6 link-local addresses (beginning with fe80::) on the other interfaces, than only one interface is able to handle IPv6 packets.
> 
> Furthermore, in /proc/sys/net/ipv6/conf you should only see one eth-interface!

  Yes, and in the example, the MN has two interfaces(eth0, eth1).

  Regards,

--
Noriaki TAKAMIYA

References:
- (usagi-users 03957) Re: UMIP-0.4 MN Tunnel Setup and Binding Update Failure
  - From: Noriaki TAKAMIYA
- (usagi-users 03958) How to enable IPv6 only on a particular interface
  - From: pramendra singh
- (usagi-users 03960) AW: How to enable IPv6 only on a particular interface
  - From: HOFMANN, Dirk

Prev by Date: (usagi-users 03960) AW: How to enable IPv6 only on a particular interface
Next by Date: (usagi-users 03963) umip 0.4 mipv6 daemon compile problem
Previous by thread: (usagi-users 03960) AW: How to enable IPv6 only on a particular interface
Next by thread: (usagi-users 03959) Re: UMIP-0.4 MN Tunnel Setup and Binding Update Failure
Index(es):
- Date
- Thread