#!/usr/bin/perl # # $Intap$ # $TINY: LLA_DAD_NAPostDAD_SameTgt.seq,v 1.6 2002/03/05 03:04:55 masaxmasa Exp $ # ######################################################################## BEGIN { $V6evalTool::TestVersion = '$Name: $ '; } use V6evalTool; use SAA; #------------------------------------------------------ #----- get sequence arguments #------------------------------------------------------ $howto_initNUT="none"; $send = "ok"; foreach (@ARGV) { # How to configure address of NUT? # sample: boot, ra, manual+_GLOBAL0A0N_UCAST /^addrconf=(\S+)/ && do {$SAA::howto_addrconf=$1; next; }; # How to initialize NUT? # sample: none, DADSuccess_boot, DADFail_boot /^init=(\S+)/ && do {$howto_initNUT=$1; next; }; # "none" if send no pakcet to NUT in state DADPostSendNS # sample: ok, none /^send=(\S+)/ && do {$send=$1; next; }; # sequence debug options # sample: qR /^sd=(\S+)/ && do {$seqdebugopt=$1; next; }; seqERROR("Unknown sequence option '$_'"); } #------------------------------------------------------ #----- test condition $IF=Link0; # network interface $max_retry_count = 10; # retry if NUT state becomes DADPostSendNS $max_retry_count = 2 if $SAA::sd =~ /q/; # quick retry $send_interval = 1; # 1[sec] time between DAD NS and DAD NS, send to NUT # (RandomDelay is 0-1sec e.g. default RetransTimer 1000msec) ########################################################## #----- Check Target Type $type=$V6evalTool::NutDef{Type}; if($type eq host) { vCPP('-DRFLAG=0'); } if($type eq router) { vCPP('-DRFLAG=1'); } ########################################################## #----- Preparetion vCapture($IF); seqPrepareLLA($IF, $V6evalTool::NutDef{System}); #----- initialize NUT vLog("*** Target initialization phase ***"); if($V6evalTool::NutDef{System} ne "manual"){ vSleep($SAA::test_interval); } $rret=vRemote("reboot_async.rmt","","timeout=$SAA::wait_rebootcmd"); vLog("reboot_async.rmt returned status $rret"); #----- start Capturing vLog("*** Target testing phase ***"); vClear($IF); #----- Wait DAD NS from NUT or timeout vLog("TN wait DAD NS(DADNS_from_NUT) from NUT for $SAA::wait_dadns{$SAA::howto_addrconf} [sec],"); %ret=vRecv($IF,$SAA::wait_dadns{$SAA::howto_addrconf},0,$count,DADNS_from_NUT); if ($ret{status} == 0){ %retSend=vSend($IF, DADNA_from_TN_SameTgt); #----- check if NUT's address is configured vSleep($SAA::wait_addrconf); if (seqCheckNUTAddrConfigured($IF) eq TRUE) { vLog("NUT assigned the address to the interface."); if ($SAA::DupAddrDetectTransmits == 0) { vLog("NUT transmit DAD NS though DupAddrDetectTransmits == 0"); seqNG(); }else{ seqNG(); } }else{ vLog("NUT seems to detect Address Duplication"); seqOK(); } } else{ vLog("TN wait DAD NS from NUT for $SAA::wait_dadns{$SAA::howto_addrconf}, but NUT had not transmit DAD NS"); seqNG(); } ########################################################## #end ######################################################################## __END__ =head1 NAME LLA_DAD_NAPostDAD_SameTgt - check the process when NUT receives DAD NA with same Target address while DAD process(after transmitting DAD NS). =head1 TARGET All Node =head1 SYNOPSIS LLA_DAD_NAPostDAD_SameTgt.seq [-tooloption ...] -pkt [addrconf=] -tooloption : v6eval tool option : packet definition file (v6eval tool option) : how to configure address on NUT; boot/reboot =begin html 
 detail of v6eval tool option: see perldoc V6evalTool.pm, perldoc V6evalRemote.pm
=end html =head1 INITIALIZATION =begin html 
 Reboot NUT or Initialize interface of NUT or Initialize IPv6 stack of NUT.
=end html =head1 TEST PROCEDURE =over 1 =item Test for Unicast address configuration The following tests are prepared in this test package. See INDEX file. B When NUT performs DAD for its Link-local unicast address made by stateless address autoconfiguration, NUT receives DAD NA which contains same target as NUT's tentative Link-local address after transimitting DAD NS. B TN NUT --------------------------------- Initialize NUT Configure address of NUT (reboot or interface initialization etc...) TN wait the DAD NS sent from NUT <=== Judgement #1: DAD NS ======= name: DADNS_from_NUT ==== Action #1: DAD NA =========> name: DADNA_from_TN_SameTgt Wait for 5+DupAddrDetectTransmits*(RetransTimer/1000)[sec] Check if NUT's address is configured ==== Action #2: SOL NS =========> name: SOLNS_from_TN_SameTgt X<== Judgement #2: SOL NA ======= name: NA_from_NUT, NA_from_NUT_woTLL =back 1 =head1 JUDGEMENT =over 1 =item Test for Link-local Unicast address autoconfiguration B B Judgement #1. NUT MUST transmit DAD NS for its autoconfigured Link-local address. name: DADNS_from_NUT src: ::0 dst: solnode[NUT's tentative Link-local] TargetAddress: NUT's tentative Link-local Action #1. TN transmits DAD NA which contains same target Address as NUT's tentative Link-local address. name: DADNA_from_TN_SameTgt src: NUT's Link-local dst: allnode TargetAddress: NUT's tentative Link-local RFlag: 0 SFlag: 0 OFlag: 1 OLLOPT: TN's MAC address Action #2. TN transmits SOL NS to check if NUT's address is configured. name: SOLNS_from_TN_SameTgt src: TN's Link-local dst: solnode[NUT's Link-local] TargetAddress: NUT's Link-local Judgement #2. NUT MUST NOT transmit SOL NA for its autoconfigured Link-local address. name: NA_from_NUT, NA_from_NUT_woTLL src: NUT's Link-local dst: TN's Link-local TargetAddress: NUT's Link-local RFlag: 0 ( if NUT is a Router then 1) SFlag: 1 OFlag: 1 TLLOPT: NUT's MAC address =back 1 =head1 REFERENCE =begin html 
RFC2462




   (omit)


5.4.4.  Receiving Neighbor Advertisement Messages


   On receipt of a valid Neighbor Advertisement message on an interface,
   node behavior depends on whether the target address is tentative or
   matches a unicast or anycast address assigned to the interface.  If
   the target address is assigned to the receiving interface, the

   solicitation is processed as described in [DISCOVERY]. If the target
   address is tentative, the tentative address is not unique.


   (omit)
=end html =head1 SEE ALSO =begin html 
 detail of v6eval tool option: see perldoc V6evalTool.pm, perldoc V6evalRemote.pm
=end html =cut