#!/usr/bin/perl
#
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 Yokogawa Electric Corporation.
# All rights reserved.
# 
# Redistribution and use of this software in source and binary
# forms, with or without modification, are permitted provided that
# the following conditions and disclaimer are agreed and accepted
# by the user:
# 
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with
#    the distribution.
# 
# 3. Neither the names of the copyrighters, the name of the project
#    which is related to this software (hereinafter referred to as
#    "project") nor the names of the contributors may be used to
#    endorse or promote products derived from this software without
#    specific prior written permission.
# 
# 4. No merchantable use may be permitted without prior written
#    notification to the copyrighters.
# 
# 5. The copyrighters, the project and the contributors may prohibit
#    the use of this software at any time.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND
# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING
# BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE, ARE DISCLAIMED.  IN NO EVENT SHALL THE
# COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 Yokogawa Electric Corporation.
# All rights reserved.
# 
# Redistribution and use of this software in source and binary
# forms, with or without modification, are permitted provided that
# the following conditions and disclaimer are agreed and accepted
# by the user:
# 
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with
#    the distribution.
# 
# 3. Neither the names of the copyrighters, the name of the project
#    which is related to this software (hereinafter referred to as
#    "project") nor the names of the contributors may be used to
#    endorse or promote products derived from this software without
#    specific prior written permission.
# 
# 4. No merchantable use may be permitted without prior written
#    notification to the copyrighters.
# 
# 5. The copyrighters, the project and the contributors may prohibit
#    the use of this software at any time.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND
# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING
# BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE, ARE DISCLAIMED.  IN NO EVENT SHALL THE
# COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# $TAHI: ct/nd/reset.seq,v 1.19 2004/08/19 09:04:46 akisada Exp $

########################################################################
BEGIN { $V6evalTool::TestVersion = '$Name: V6PC_P1_1_3_3 $ '; }

use V6evalTool;
use nd;

my $wait_readout = $nd::DELAY_FIRST_PROBE_TIME +
    $nd::RETRANS_TIMER * $nd::MAX_UNICAST_SOLICIT + 1;

my $IF = 'Link0';

ndOptions(@ARGV);

# The following generate debugging messages.
$nd::debug=$ndOpt_v|$ndOpt_vv;

# You can specifies debug options to a remote control program.
# If you want to know more detail, please see the following:
# - V6evalTool.pm: perldoc V6evalTool
# - V6evalRemote.pm: perldoc V6evalRemote
$nd::remote_debug="-o1" if $ndOpt_vv;

#
#
#
#$type=$V6evalTool::NutDef{'Type'};
#if(($type ne 'host') && ($type ne 'router') && ($type ne 'special')) {
#    vLogHTML(ndErrmsg("ERROR: $V6evalTool::NutDef{Type}: ".
#		      "Unknown target type: $type<BR>"));
#    goto error;
#}

#
# Create TN.def in the current directory
#
goto error if nd2NoNce($IF) != 0;

#
#
#
vLogHTML("Trying to reboot NUT<BR>");
goto error if ndReboot() != 0;

#
#
#
vLogHTML("*** OK ***<BR>");
exit $V6evalTool::exitIgnore;

error:
    vLogHTML("*** NG ***<BR>");
	readout($IF, $wait_readout);
    exit $V6evalTool::exitFatal;

sub readout($$) {
	my ($if, $timeout) = @_;
	return(vRecv($if, $timeout, 0, 0));
}

########################################################################
__END__

=head1 NAME

reset - Reset NUT

=head1 TARGET

Host/Router/Special

=head1 SYNOPSIS

  reset.seq [-tooloption ...] -p reset.def

=head1 INITIALIZATION

N/A

=head1 TEST PROCEDURE

B<reset> initialize NUT

=head1 JUDGEMENT

N/A

=head1 NOTE

N/A

=head1 SEE ALSO

  perldoc V6evalTool
  perldoc V6evalRemote

=cut