#!/usr/bin/perl
#
# Copyright (C) 1999,2000 Yokogawa Electric Corporation and
#                         YDC Corporation.
# All rights reserved.
# 
# Redistribution and use of this software in source and binary
# forms, with or without modification, are permitted provided that
# the following conditions and disclaimer are agreed and accepted
# by the user:
# 
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with
#    the distribution.
# 
# 3. Neither the names of the copyrighters, the name of the project
#    which is related to this software (hereinafter referred to as
#    "project") nor the names of the contributors may be used to
#    endorse or promote products derived from this software without
#    specific prior written permission.
# 
# 4. No merchantable use may be permitted without prior written
#    notification to the copyrighters.
# 
# 5. The copyrighters, the project and the contributors may prohibit
#    the use of this software at any time.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND
# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING
# BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE, ARE DISCLAIMED.  IN NO EVENT SHALL THE
# COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# $Id: RTU_E_In_descbc_hmacsha1.seq,v 1.1.1.1 2000/10/31 22:39:39 sekiya Exp $
#
######################################################################
BEGIN {
    unshift(@INC, '../ipsec/');
    $V6evalTool::TestVersion = '$Name:  $ ';
}

use V6evalTool;
use IPSEC;

%pktdesc = (
            ### TBD
);
$IF0 = Link0;
$IF1 = Link1;

#----- check NUT type

ipsecCheckNUT(router);

#----- set SAD,SPD
vLogHTML("<FONT SIZE=3>*** Target initialization phase ***</FONT><BR>");

ipsecClearAll();

## HOST1 vs NUT
ipsecSetSAD(
	"src=$IPSEC::IPsecAddr{IPSEC_SG1_NET2_ADDR}" ,
	"dst=$IPSEC::IPsecAddr{IPSEC_NUT_NET0_ADDR}" ,
	"spi=0x1000" ,
	"mode=tunnel" ,
	"direction=in" ,
	"protocol=esp" ,
	"ealgo=des-cbc" ,
	"ealgokey=01234567" ,
	"eauth=hmac-sha1" ,
	"eauthkey=0123456789ABCDEF0123" ,
	"nsrc=$IPSEC::IPsecAddr{IPSEC_NET4_ADDR}" ,
	"ndst=$IPSEC::IPsecAddr{IPSEC_NET1_ADDR}" ,
	);

#ipsecSetSPD(
#	"tsrc=$IPSEC::IPsecAddr{IPSEC_SG1_NET2_ADDR}" ,
#	"tdst=$IPSEC::IPsecAddr{IPSEC_NUT_NET0_ADDR}" ,
#	"src=$IPSEC::IPsecAddr{IPSEC_NET4_ADDR}" ,
#	"dst=$IPSEC::IPsecAddr{IPSEC_NET1_ADDR}" ,
#	"upperspec=any" ,
#	"direction=in" ,
#	"protocol=esp" ,
#	"mode=tunnel" ,
#	);

ipsecEnable();

#======================================================================
vLogHTML("<FONT SIZE=3>*** Target testing phase ***<FONT><BR>");
vCapture($IF0);
vCapture($IF1);

#           NET1     NET0     NET2    NET4
#  HOST1_NET1 -- NUT -- Router -- SG1 -- HOST1_NET4
#                 <====tunnel=====

($stat, %ret) = ipsecForwardDecap($IF0, $IF1, 
    'esptun_from_sg1_net2_echo_request_from_host1_net4_to_host1_net1_on_net0',
    'echo_request_from_host1_net4_to_host1_net1_on_net1');

if ($stat ne 'GOT_PACKET') {
    vLogHTML('TN received no decapuslated packet from NUT<BR>');
    ipsecExitFail();
}

vLogHTML("TN received decapsulated packet from HOST1_NET4 to HOST1_NET1.<BR>");
ipsecExitPass();


######################################################################
__END__

=head1 NAME

  RTU_E_In_descbc_hmacsha1 - Router Tunnel Mode ESP Inbound DES-CBC with HAMC-SHA1 authentication

=head1 TARGET

  Router

=head1 SYNOPSIS

=begin html
<PRE>
  <A HREF="./RTU_E_In_descbc_hmacsha1.seq">RTU_E_In_descbc_hmacsha1.seq</A> [-tooloption ...] -pkt <A HREF="./RTU_E_descbc_hmacsha1.def">RTU_E_descbc_hmacsha1.def</A>
    -tooloption : v6eval tool option
  See also <A HREF="./RTU_E_common.def">RTU_E_common.def</A> and <A HREF="./RTU_common.def">RTU_common.def</A>
</PRE>

=end html

=head1 INITIALIZATION

=begin html
<P>
For details of Network Topology, see <A HREF="00README">00README</A>
</P>
<P>
Set NUT's SAD and SPD as following:
</P>
<PRE>
                           (Link0) (Link1)
            NET4   NET2      NET0   NET1
  HOST1_NET4 -- SG1 -- Router -- NUT -- HOST1_NET1
                 =====tunnel======>
</PRE>
<P>
Security Association Database (SAD)
</P>
<TABLE border="1">
  <TR>
    <TD>source address</TD>
    <TD>SG1_NET2</TD></TR>
  <TR>
    <TD>destination address</TD>
    <TD>NUT_NET0</TD></TR>
  <TR>
    <TD>SPI</TD>
    <TD>0x1000</TD></TR>
  <TR>
    <TD>mode</TD>
    <TD>tunnel</TD></TR>
  <TR>
    <TD>protocol</TD>
    <TD>ESP</TD></TR>
  <TR>
    <TD>ESP algorithm</TD>
    <TD>DES-CBC</TD></TR>
  <TR>
    <TD>ESP algorithm key</TD>
    <TD>01234567</TD></TR>
  <TR>
    <TD>ESP authentication</TD>
    <TD>HMAC-SHA1</TD></TR>
  <TR>
    <TD>ESP authentication key</TD>
    <TD>0123456789ABCDEF0123</TD></TR>
</TABLE>
<P>
Security Policy Database (SPD)
</P>
<TABLE border="1">
  <TR><TD>No SPD entry</TD></TR>
<!--
  <TR>
    <TD>tunnel source address</TD>
    <TD>SG1_NET2</TD></TR>
  <TR>
    <TD>tunnel destination address</TD>
    <TD>NUT_NET0</TD></TR>
  <TR>
    <TD>source address</TD>
    <TD>NET4</TD></TR>
  <TR>
    <TD>destination address</TD>
    <TD>NET1</TD></TR>
  <TR>
    <TD>upper spec</TD>
    <TD>any</TD></TR>
  <TR>
    <TD>direction</TD>
    <TD>in</TD></TR>
  <TR>
    <TD>protocol</TD>
    <TD>ESP</TD></TR>
  <TR>
    <TD>mode</TD>
    <TD>tunnel</TD></TR>
-->
</TABLE>

=end html

=head1 TEST PROCEDURE

=begin html
<PRE>
 Tester                      Target                      Tester
              (Link0)                     (Link1)
   |                           |                           |
   |-------------------------->|                           |
   |      ICMP Echo Request    |                           |
   |        (with ESP)         |                           |
   |                           |-------------------------->|
   |                           |      ICMP Echo Request    |
   |                           |                           |
   |                           |                           |
   |                           |                           |
   v                           v                           v
</PRE>
<OL>
  <LI>Send ICMP Echo Request with ESP to Link0
  <LI>Receive ICMP Echo Request from Link1
</OL>
<P>
ICMP Echo Request with ESP to Link0
</P>
<TABLE border="1">
  <TR>
    <TD>IP Header</TD>
    <TD>Source Address</TD>
    <TD>SG1_NET2</TD></TR>
  <TR>
    <TD></TD>
    <TD>Destination Address</TD>
    <TD>NUT_NET0</TD></TR>
  <TR>
    <TD>ESP</TD>
    <TD>SPI</TD>
    <TD>0x1000</TD></TR>
  <TR>
    <TD></TD>
    <TD>Algorithm</TD>
    <TD>DES-CBC</TD></TR>
  <TR>
    <TD></TD>
    <TD>Key</TD>
    <TD>01234567</TD></TR>
  <TR>
    <TD></TD>
    <TD>Authentication Algorithm</TD>
    <TD>HMAC-SHA1</TD></TR>
  <TR>
    <TD></TD>
    <TD>Authentication Key</TD>
    <TD>0123456789ABCDEF0123</TD></TR>
  <TR>
    <TD>IP Header</TD>
    <TD>Source Address</TD>
    <TD>HOST1_NET4</TD></TR>
  <TR>
    <TD></TD>
    <TD>Destination Address</TD>
    <TD>HOST1_NET1</TD></TR>
  <TR>
    <TD>ICMP</TD>
    <TD>Type</TD>
    <TD>128 (Echo Request)</TD></TR>
</TABLE>
<P>
ICMP Echo Request from Link1
</P>
<TABLE border="1">
  <TR>
    <TD>IP Header</TD>
    <TD>Source Address</TD>
    <TD>HOST1_NET4</TD></TR>
  <TR>
    <TD></TD>
    <TD>Destination Address</TD>
    <TD>HOST1_NET1</TD></TR>
  <TR>
    <TD>ICMP</TD>
    <TD>Type</TD>
    <TD>128 (Echo Request)</TD></TR>
</TABLE>


=end html

=head1 JUDGEMENT

  PASS: ICMP Echo Request received

=head1 SEE ALSO

  perldoc V6evalTool

=begin html
<PRE>
  <A HREF="./IPSEC.html">IPSEC.html</A> IPsec Test Common Utility
</PRE>

=end html

=cut