#!/usr/bin/perl
#
# $Copyright$
#
# $Id: RH_ToDestinationNode.seq,v 1.1.1.1 2000/10/31 22:39:21 sekiya Exp $
#
######################################################################
BEGIN {
	$V6evalTool::TestVersion = '$Name:  $';
}

use V6evalTool;

if ($V6evalTool::NutDef{Type} ne 'router') {
    vLogHTML("This test is for the router only<BR>");
    exit $V6evalTool::exitRouterOnly;
}

%pktdesc = (
	packet_to_link0		=> 'Send Packet to Link0 (Router2 to Router3)',
	packet_from_link1	=> 'Recv Packet from Link1 (Router3 to Host2)',
	packet_to_link1		=> 'Send Packet to Link1 (Host2 to Router3)',
	packet_from_link0	=> 'Recv Packet from Link0 (Router3 to Router2)',

	na_to_link0		=> 'Send Neighbor Advertisement to Link0 (Global Address)',
	na_to_link0_ll		=> 'Send Neighbor Advertisement to Link0 (Link Local Address)',
	na_to_link1		=> 'Send Neighbor Advertisement to Link1 (Global Address)',
	na_to_link1_ll		=> 'Send Neighbor Advertisement to Link1 (Link Local Address)',

	ns_from_link0		=> 'Recv Neighbor Solicitation from Link0 (Global Address)',
	ns_from_link0_ll	=> 'Recv Neighbor Solicitation from Link0 (Link Local Address)',
	ns_from_link1		=> 'Recv Neighbor Solicitation from Link1 (Global Address)',
	ns_from_link1_ll	=> 'Recv Neighbor Solicitation from Link1 (Link Local Address)',

);

$IF0 = Link0;
$IF1 = Link1;

#----- start capturing

vCapture($IF0);
vCapture($IF1);

#======================================================================

vSend($IF0, packet_to_link0);

%ret = vRecv($IF1, 5, 0, 0, ns_from_link1, ns_from_link1_ll, packet_from_link1);
if ($ret{status} != 0) {
	vLogHTML('<FONT COLOR="#FF0000">NG</FONT>');
	exit $V6evalTool::exitFail;
}

if ($ret{recvFrame} eq 'ns_from_link1') {
	vSend($IF1, na_to_link1);
	%ret = vRecv($IF1, 5, 0, 0, packet_from_link1);
	if ($ret{status} != 0) {
		vLogHTML('<FONT COLOR="#FF0000">NG</FONT>');
		exit $V6evalTool::exitFail;
	}
}
if ($ret{recvFrame} eq 'ns_from_link1_ll') {
	vSend($IF1, na_to_link1_ll);
	%ret = vRecv($IF1, 5, 0, 0, packet_from_link1);
	if ($ret{status} != 0) {
		vLogHTML('<FONT COLOR="#FF0000">NG</FONT>');
		exit $V6evalTool::exitFail;
	}
}
if ($ret{recvFrame} ne 'packet_from_link1') {
	vLogHTML('<FONT COLOR="#FF0000">NG</FONT>');
	exit $V6evalTool::exitFail;
}

vSend($IF1, packet_to_link1);

%ret = vRecv($IF0, 5, 0, 0, ns_from_link0, ns_from_link0_ll, packet_from_link0);
if ($ret{status} != 0) {
	vLogHTML('<FONT COLOR="#FF0000">NG</FONT>');
	exit $V6evalTool::exitFail;
}
if ($ret{recvFrame} eq 'ns_from_link0') {
	vSend($IF0, na_to_link0);
	%ret = vRecv($IF0, 5, 0, 0, packet_from_link0);
	if ($ret{status} != 0) {
		vLogHTML('<FONT COLOR="#FF0000">NG</FONT>');
		exit $V6evalTool::exitFail;
	}
}
if ($ret{recvFrame} eq 'ns_from_link0_ll') {
	vSend($IF0, na_to_link0_ll);
	%ret = vRecv($IF0, 5, 0, 0, packet_from_link0);
	if ($ret{status} != 0) {
		vLogHTML('<FONT COLOR="#FF0000">NG</FONT>');
		exit $V6evalTool::exitFail;
	}
}
if ($ret{recvFrame} ne 'packet_from_link0') {
	vLogHTML('<FONT COLOR="#FF0000">NG</FONT>');
	exit $V6evalTool::exitFail;
}

vLogHTML('OK');
exit $V6evalTool::exitPass;

######################################################################
__END__

=head1 NAME

  RH_ToDestinationNode - check Routing Header Processing (to Destination Node)

=head1 TARGET

  Router

=head1 SYNOPSIS

=begin html
<PRE>
  <A HREF="./RH_ToDestinationNode.seq">RH_ToDestinationNode.seq</A> [-tooloption ...] -pkt <A HREF="./RH_ToDestinationNode.def">RH_ToDestinationNode.def</A>
    -tooloption : v6eval tool option
  See also <A HREF="./RH.def">RH.def</A>
</PRE>

=end html

=head1 INITIALIZATION

  None

=head1 TEST PROCEDURE

  Tester                      Target                      Tester
              (Link0)                     (Link1)
    |                           |                           |
    |-------------------------->|                           |
    |   Packet to Link0         |                           |
    |                           |                           |
    |                           |-------------------------->|
    |                           |   Neighbor Solicitation   |
    |                           |                           |
    |                           |<--------------------------|
    |                           |   Neighbor Advertisement  |
    |                           |                           |
    |                           |-------------------------->|
    |                           |   Packet from Link1       |
    |                           |                           |
    |                           |                           |
    |                           |<--------------------------|
    |                           |   Packet to Link1         |
    |                           |                           |
    |<--------------------------|                           |
    |   Neighbor Solicitation   |                           |
    |                           |                           |
    |-------------------------->|                           |
    |   Neighbor Advertisement  |                           |
    |                           |                           |
    |<--------------------------|                           |
    |   Packet from Link0       |                           |
    |                           |                           |
    v                           v                           v

  1. Send Packet to Link0
  2. Wait Packet from Link1 or NS from Link1
  3. If NS received then send NA to Link1, and wait Packet form Link1 again
  4. Receive Packet from Link1
  5. Send Packet to Link1
  6. Wait Packet from Link0 or NS from Link0
  7. If NS received then send NA to Link0, and wait Packet form Link0 again
  8. Receive Packet from Link0

  Network topology

                                       (Link0)        (Link1)
                                Tester         Target         Tester
    Host1 ------ Router1 ------ Router2 ------ Router3 ------ Host2
         Global 4       Global 2       Global 0       Global 1

  Packet to Link0 is:

        IPv6 Header
            Version            = 6
            Traffic Class      = 0
            FlowLabel          = 0
            PayloadLength      = 56
            NextHeader         = 43 (Routing Header)
            HopLimit           = 64
            SourceAddress      = Global 4 Address (Host1)
            DestinationAddress = Global 0 Address (Router3)

        Routing Header
            NextHeader      = 59 (No Next Header)
            HeaderExtLength = 6 
            RoutingType     = 0 
            SegmentsLeft    = 1 
            Address[1]      = Global 4 Address (Router1)
            Address[2]      = Global 2 Address (Router2)
            Address[3]      = Global 1 Address (Host2)

  Packet to Link1 is:

        IPv6 Header
            Version            = 6
            Traffic Class      = 0
            FlowLabel          = 0
            PayloadLength      = 56
            NextHeader         = 43 (Routing Header)
            HopLimit           = 64
            SourceAddress      = Global 1 Address (Host2)
            DestinationAddress = Global 1 Address (Router3)

        Routing Header
            NextHeader      = 59 (No Next Header)
            HeaderExtLength = 6 
            RoutingType     = 0 
            SegmentsLeft    = 3 
            Address[1]      = Global 0 Address (Router2)
            Address[2]      = Global 2 Address (Router1)
            Address[3]      = Global 4 Address (Host1)


  Neighbor Solicitation packet's IP source Address selection may be:
    - Link Local Address
    - Global Address
  This test IS NOT the Neighbor Discovery test, so admit both implementation.

=head1 JUDGEMENT

  PASS: Packet from Link1 and Packet from Link0 Received

    Packet from Link1 is:

        IPv6 Header
            Version            = 6
            Traffic Class      = 0
            FlowLabel          = 0
            PayloadLength      = 56
            NextHeader         = 43 (Routing Header)
            HopLimit           = 63 (decremented)
            SourceAddress      = Global 4 Address (Host1)
            DestinationAddress = Global 1 Address (Host2) <---+
                                                              |
        Routing Header                                        |
            NextHeader      = 59 (No Next Header)             | (swapped)
            HeaderExtLength = 6                               |
            RoutingType     = 0                               |
            SegmentsLeft    = 0 (decremented)                 |
            Address[1]      = Global 4 Address (Router1) <----+
            Address[2]      = Global 2 Address (Router2)
            Address[3]      = Global 0 Address (Router3)


    Packet from Link0 is:

        IPv6 Header
            Version            = 6
            Traffic Class      = 0
            FlowLabel          = 0
            PayloadLength      = 56
            NextHeader         = 43 (Routing Header)
            HopLimit           = 63 (decremented)
            SourceAddress      = Global 1 Address (Host2)
            DestinationAddress = Global 0 Address (Router2) <-+
                                                              |
        Routing Header                                        |
            NextHeader      = 59 (No Next Header)             | (swapped)
            HeaderExtLength = 6                               |
            RoutingType     = 0                               |
            SegmentsLeft    = 2 (decremented)                 |
            Address[1]      = Global 1 Address (Router3)      |
            Address[2]      = Global 2 Address (Router1)      |
            Address[3]      = Global 4 Address (Host1) <------+

=head1 SEE ALSO

  perldoc V6evalTool

=cut